QUALITY ELECTRIC POWERED GOLF TROLLEYS - GOLF CADDIES
     
spare parts
 
date effective
1st January 2009
 
date last updated
15th May 2009
Item
 Ref
MSRP
  
KXR 400 and LX 400 models
Sliding latch - top hinge unit complete
SL-LX
27.00
Handle assembly complete
HAN-LX
57.00

Short aluminum frame section – above top hinge mechanism
FR1

13.00
Hinge mechanism - bottom hinge mechanism complete
HM-LX
27.00
Short frame section – above lower hinge mechanism
FR2
11.00
Long frame section – below lower hinge mechanism
FR3
17.00
Manual control - combined ON/OFF switch and speed control
MANSPD-LS
18.00
Upper bag holder complete with straps
UBH-LS
23.00
Straps for upper or lower bag holder complete with fixing bolt sets
UBHS-LS
15.00
Bottom bag holder and front wheel housing combined - complete with straps (does not include front wheel assembly)
BBH-LS
33.00
Bottom bag holder complete with straps - and front wheel assembly combined - complete with front wheel
BBHC-LX-KX

43.00
Nut and bolt set - to secure drive coupling to axle (quantity 4)
NBCOUP

6.00
Nut and bolt sets - to secure gearbox axle (quantity 4)
NBGBX
6.00
Front wheel (wheel only)
FWO-LS
19.00
Front wheel axle only - complete with nuts - bolts - spacers
FWAX-LS
13.00
Rear stabilizing wheel (wheel only)
RWO-LS
19.00
Rear wheel axle complete with nuts - bolts - spacers
RWAX-LS
13.00
Rear wheel housing only
RWH-LS
23.00
Spring loaded securing pin for rear wheel
RWP-LS
11.00
Rear stabilizing wheel assembly complete (housing and wheel)
RWAC-LS
47.00
Nut- bolt - set - to secure motor/gearbox to axle (set of two)
NBSET-GBX
5.00
Nut- bolt - set - to secure drive couplings to axle (set of two)
NBSET-DC
5.00

Deep cycle battery 12 volt 33 Ampere/hr   Note : does not include a battery cover
B33CN-LS
107.00
Battery cover with power indicator - for 12 volt 33 Ampere/hr battery
BC33-LS
33.00
Battery charger complete with connection cables
CHA-LS
43.00
LX 400 only
Complete motor and gearbox assembly - left (left hand side - viewed from the rear of the cart)
MOTGBX-LS-LEFT
129.00
Complete motor and gearbox assembly - right (right hand side - viewed from the rear of the cart)
MOTGBX-LS
129.00
NOTE : when ordering these motor/gearbox units it is important to first inspect the configuration of the original unit. There is a mounting sleeve protruding from the gearbox - the mounting bolt goes through this sleeve and fixes to the axle. Some units have a mounting sleeve on only one side and some units have a sleeve on both sides. Please inspect your unit and then call us with this information after placing your order.
   
Controller - complete with main IC board - receiving IC board - all connections - this replacement unit requires a new transmitter
CONTR-L
117.00
Drive wheel assembly complete for model LX400 - note : for use with 3-pronged drive coupling
DRWH-LX400
31.00
Drive coupling (3-pronged style)
DRC-LS
13.00
Remote control trasnsmitter for LX400 (not including batteries - needs two standard AAA 1.5 volt batteries)
TRA-LX
37.00
Main drive axle 261 mm long x 12 mm
AXL-L
23.00
KXR 400 only
 
Air tire (pneumatic tire) wheel assembly complete - for KXR400 model
AT-KXR
39.00
Drive coupling for KXR400 - (2-pronged style - set of two)
DRC-KXR
13.00
Remote control trasnsmitter for KXR400 (not including batteries - needs two standard AAA 1.5 volt batteries)
TRA-K
37.00
Standard drive wheel assembly complete for model KXR400 and KXM200 - note : for use with 2-pronged drive coupling
DRWH-KXR/M
31.00
Main drive wheel axle for KXR400
MDAX-KXR
23.00
Single motor models - SMS 200 and KXM 200 only
Controller - complete with main IC board - all connections
CONTR-S
93.00
Complete motor and gearbox assembly for single-motor carts KXM200
MOTGBX-KXM
129.00
Main drive axle 620 mm long x 12 mm - NOT CURRENTLY AVAILABLE
AXL-S
23.00
  
Common to HGR 360 and HGS 180
 
Front wheel assembly complete - bag carrier - housing and wheel - and axle
FWAC-H
43.00
Lower bag carrier - front wheel housing only
FWHO-H
33.00
Front wheel only
FBWO-A
19.00
Axle for front wheel - complete with nuts - spacer - and washers
FRAX-H
13.00
Rear stabilizing wheel (wheel only)
RWO-A
19.00
Axle for rear stabilizing wheel - complete with nuts - spacer - and washers
RWAX-A
13.00
Rear stabilizer wheel housing only
RWH-A
23.00
Spring loaded securing pin for rear wheel
RWP-A
9.00
Rear stabilizing wheel assembly complete (housing and wheel)
RWAC-A
47.00
Upper bag holder - complete with straps
UBHC-H
31.00
Drive wheel assembly complete for model HGR360 and HGS180 - note : for use with 3-pronged drive coupling
DRWH-HGR

31.00
Drive coupling (fits onto axles - connects to drive wheel) - original 3-pronged coupling
DRC-A
13.00
Main central hinge assembly complete
MHIN-H
36.00
Small front hinge complete with 2 bolt caps
SHIN-H
17.00
Plastic coil (wiring protector inside of hinge)
COIL-H
9.00
Battery charger complete with connection cables - US wall plug
CHA-A
43.00
HGR 360 only
  
Controller HGR360 - requires new transmitter
CONTR-HGR360
117.00
Main drive axle for HGR360 - 155mm x 12mm
AXL-HGR360
23.00
Complete motor and gearbox assembly HGR360 - left (left hand side - viewed from behind the cart - female plug connection)
MOTGBSL-H
129.00
Complete motor and gearbox assembly HGR360 - right (right hand side - viewed from behind the cart - male plug connection)
MOTGBXR-H
129.00
Drive wheel assembly complete HGR360.
DRWH-HGR
31.00
Handle assembly complete with ON/OFF switch
HAN-HGR
57.00
Transmitter - HGR360 - nor including batteries (needs 2 x AAA 1.5 volt batteries)
TRA-A
37.00
"High Cycle" battery battery 12 volt 33 Ampere/hr - HGR360
B33CN-A
107.00
Battery cover with power indicator - for 12 volt 33 Ampere/hr battery - HGR360
BC33-A
33.00
Manual control speed switch - complete with new "plug-in" wire connector for HGR360
SSWIT-HGR360
11.00
Rear wheel assembly complete (housing and wheel and spring loaded pin
RWAC-H
43.00
Rear wheel housing only
RWHO-H
17.00
Rear wheel assembly complete (housing and wheel and spring loaded pin - complete with mounting bracket
RWACWB-HGS
47.00
HGS 180 only
  
20 A/hr battery for HGS180
 B20CN-HGS180
67.00
Case for 20 A/hr battery complete with connection leads and plug
 BCASE-HG180
26.00
Drive wheel assembly complete HGR360
DRWH-A
31.00
Handle assembly complete (Including ON/OFF switch and LED and new plug-in wire connector) for  HGS 180
HAN-HGS180
57.00
Main drive axle HGS180 - NOT CURRENTLY AVAILABLE
AXL-HGS180
23.00
  
Controller HGS180 - NOT CURRENTLY AVAILABLE
CONTR-HGS180
87.00
  
Support bracket (battery and controller) for HGS180 - NOT CURRENTLY AVAILABLE
SBKT-HGS180
16.00
  
Manual control speed switch - complete with new "plug-in" wire connector for HGS180 - NOT CURRENTLY AVAILABLE
SSWIT-HGS180
11.00
  
Complete motor and gearbox assembly HG180
MOTGBX-H180
129.00
Rear wheel assembly complete (housing and wheel and spring loaded pin
RWAC-H
43.00
Rear wheel housing only
RWHO-H
17.00
Rear wheel assembly complete (housing and wheel and spring loaded pin - complete with mounting bracket
RWACWB-HGS
47.00
Controller cover - HGS180 - NOT CURRENTLY AVAILABLE
CCOV-HGS180
6.00