QUALITY ELECTRIC POWERED GOLF TROLLEYS - GOLF CADDIES
spare parts - KX series
date effective
1st January 2010
date last updated
7th April 2010
CLICK ON ANY IMAGE TO SEE LARGER SIZE
Item
MSRP
KXR 400 model
Sliding latch hinge mechanism - upper (top) hinge unit complete
27.00
Handle assembly complete
57.00
Sliding latch hinge mechanism - lower (bottom) hinge unit complete
27.00
Manual control - combined ON/OFF switch and speed control
18.00
Upper bag holder complete with straps
23.00
Straps for upper or lower bag holder complete with fixing bolt sets
15.00
Bottom bag holder and front wheel housing combined - complete with straps (does not include front wheel assembly)
33.00
Front wheel assembly combined with bottom bag holder - complete with front wheel
43.00
Front wheel (wheel only)
19.00
Front wheel axle only - complete with nuts - bolts - bearings and spacers
13.00
Rear stabilizing wheel (wheel only)
19.00
Rear wheel axle complete with nuts - bolts - bearings and spacers
13.00
Rear stabilizer wheel housing only
23.00
Spring loaded securing pin for rear wheel
11.00
Rear stabilizing wheel assembly complete (housing and wheel)
47.00
T-bracket - tubular - connects rear stabilizer wheel to frame
11.00
Nut/bolt - set - to secure motor/gearbox or drive coupling to axle (quantity 4)
5.00
Complete motor and gearbox assembly - 200 Watt - left (left hand side - viewed from the rear of the cart)mounting sleeve on the right side of gearbox - female plug connector - see Note # 1 below
129.00
Complete motor and gearbox assembly - 200 Watt - right (right hand side - viewed from the rear of the cart) mounting sleeve on theleft side of gearbox - male plug connector - see Note # 2 below
129.00
Controller - complete with main IC board - receiving IC board - all connections
137.00
Deep cycle battery 12 volt 33 Ampere/hr Note : does not include a battery cover
117.00
Battery cover with power indicator - for 12 volt 33 Ampere/hr battery
33.00
Battery charger complete with connection cables
43.00
Connection cable only for battery charger - AC socket to charger
11.00
Standard wheel - for KXR400 model (see note # 3 below)
31.00
Drive coupling - older smaller style - only suitable for the older "Standard" wheel for the KXR400 model (see above) - set of 4
13.00
Air tire (pneumatic tire) wheel assembly complete - for KXR400 model - fits to the new stronger 2-pronged drive coupling - see below
39.00
catch mechanism - for Air Tires
17.00
Drive coupling for KXR400 - (2-pronged style - set of two) this is the newer stronger coupling designed only for the 2-pronged Air Tires
13.00
Remote control transmitter for KXR400
37.00
Main drive wheel axle for KXR400 (same drive axle as on the QST400)
23.00
Black plastic axle bearing
9.00
Single motor model KXM 200
Controller - complete with main IC board - all connections are small square (one male and one female) Ryder connectors
93.00
Complete motor and gearbox assembly for single-motor carts KXM200
129.00
Main drive axle
23.00
Frame components
Frame frame section ref # 1 - short section above top hinge mechanism
13.00
Frame section ref # 2 - short section above lower hinge mechanism
11.00
Frame section ref # 3 - long section below lower hinge mechanism
Component ref # 13 - bolt/nut - front wheel assembly
1.00
Component ref # 14 - frame bolt/nut - short
1.00
NOTES :
1 Motor/gearbox units for KXR400 carts. Before ordering please check the shape of the plug at the end of the connection lead - this should be all black and be a male plug - also that the mounting sleeve should be protruding from the right hand side of the gearbox(when viewed from above and from the rear of the cart - this is the steel sleeve through which the nut/bolt secures the gearbox to the axle) - click here for images .
2 Motor/gearbox units for KXR400 carts. Before ordering please check the shape of the plug at the end of the connection lead - this should be all black and be a female plug - also that the mounting sleeve should be protruding from the right hand side of the gearbox (when viewed from above and from the rear of the cart - this is the steel sleeve through which the nut/bolt secures the gearbox to the axle) - click here for images
3 A limited supply of these wheels is still available for replacement of a single wheel. However they only fit to the older (smaller) 2-pronged drive couplings which can be supplied free of charge with the wheels. For a more permanent solution, if you need two wheels for the KXR400 you should order a pair of the new Air Tires with the new stronger drive couplings.
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
)
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
)
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
)
)
){kind=small}
){kind=small}
){kind=spacer}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
)
)
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
)