QUALITY ELECTRIC POWERED GOLF TROLLEYS - GOLF CADDIES
spare parts - QST series
   
date effective
1st January 2010
   
date last updated
7th April 2010

 

CLICK ON ANY IMAGE TO SEE LARGER SIZE
 
 
Item
 
MSRP
 
QST 400 model
 
Sliding latch hinge mechanism - upper (top) hinge unit complete
27.00
Handle assembly complete
57.00
Wiring harness (lead wire) connecting handle to controller
23.00
Sliding latch hinge mechanism - lower (bottom) hinge unit complete
27.00
Manual control - combined ON/OFF switch and speed control
18.00
Short aluminum frame section – above top hinge mechanism
13.00
Short frame section – above lower hinge mechanism
11.00
Long frame section – below lower hinge mechanism
17.00
Upper bag holder complete with straps
23.00
Straps for upper or lower bag holder complete with fixing bolt sets
15.00
Bottom bag holder and front wheel housing combined - complete with straps (does not include front wheel assembly)
33.00
Front wheel assembly combined with bottom bag holder - complete with front wheel

43.00

Front wheel (wheel only)
19.00
Front wheel axle only - complete with nuts - bolts - bearings and spacers
13.00
Rear stabilizing wheel (wheel only)
19.00
Rear wheel axle complete with nuts - bolts - bearings and spacers
13.00
Rear stabilizer wheel housing only
23.00
Spring loaded securing pin for rear wheel
11.00
Rear stabilizing wheel assembly complete (housing and wheel)
47.00
T-bracket - tubular - connects rear stabilzer wheel to frame
11.00
Nut/bolt - set - to secure motor/gearbox or drive coupling to axle (quantity 4)
5.00
Complete motor and gearbox assembly - LINIX - 200 Watt - left (left hand side - viewed from the rear of the cart) axle mounting sleeve on the right side of gearbox - flat Anderson connector plug - see Note # 1 below
129.00
Complete motor and gearbox assembly - LINIX - 200 Watt - right (right hand side - viewed from the rear of the cart) axle mounting sleeve on the left side of gearbox - flat Anderson connector plug - see Note # 1 below
129.00
Controller - complete with main IC board - receiving IC board - all connections
137.00

Deep cycle battery 12 volt 33 Ampere/hr   Note : does not include a battery cover

117.00
Battery cover with power indicator - for 12 volt 33 Ampere/hr battery
33.00
Battery charger complete with connection cables
43.00
Connection cable only for battery charger - AC socket to charger
11.00
Air tire (pneumatic tire) wheel assembly complete - for QST400 model
39.00
Drive coupling for QST400 - (3-pronged style - set of two)
13.00
Remote control trasnsmitter for QST400
37.00
Main drive wheel axle for QST400 (same axle as on the KXR400)
23.00
Black plastic axle bearing
9.00
Frame components
 
Frame frame section ref # 1 - short section above top hinge mechanism
13.00
Frame section ref # 2 - short section above lower hinge mechanism
11.00
Frame section ref # 3 - long section below lower hinge mechanism
17.00
Frame section # 04 - aluminum tube section - rear vertical
23.00
Frame section # 05 - aluminum tube section - long - lower
29.00
Frame section # 06 - aluminum tube section - horizintal
11.00
Frame section # 07 - aluminum tube section - short
9.00
Component ref # 08 - nylon axle bearing
9.00
Component ref # 09 - black plastic spacer
1.00
Component ref # 10 - black plastic tube end plug
1.00
Component ref # 11 - black plastic spacer - double concave
1.00
Component ref # 12 - frame bolt/nut
3.00
Component ref # 13 - bolt/nut - front wheel assembly
1.00
Component ref # 14 - frame bolt/nut - short
1.00
 

NOTES :

    Motor/gearbox units for QST400 carts. Before ordering please check the shape of the plug at the end of the connection lead - this should be a flat Anderson plug as in the photo - usually red/white but sometime black/red. Also please note from which side of the gearbox the mounting sleeve protrudes - left or right hand side when viewed from the top and the rear of the cart (this is the steel sleeve through which the nut/bolt secures the gerabox to the axle) - please refer to the illustrated sheet by clicking here - either email or telephone this information to us on (559) 561 1234.